by John Glynn | Feb 22, 2016 | Classic Porsche Blog, Project Cars
As my small car collection lay mostly unused last year, I made “use it or lose it” my car motto for 2016. The little 1981 Porsche 924 Turbo has enjoyed a lot of attention so far this year (spent another full day on it yesterday), but this morning I finally pushed the 1976 911 Carrera 3.0 out of its corner and took a good look at it after a few years unused.
Porsche Paint Microblistering
I discovered some microblistering in the paint last year, caused by using a car cover (genuine Porsche Tequipment) in a relatively damp environment, so I expected to find a bit more on the other side closest to the wall. Turns out I underestimated the amount as that entire rear quarter panel is covered in tiny blisters – the car will definitely need a repaint. I am sort of OK with it as it will give Robert at Racing Restorations a chance to repair some other panel stuff I have never been happy with. It won’t happen this year, but I’ll have a budget for it in 2017.
The main aim at the minute is to fire the engine up and get it ready for an MOT sometime in April. Advice from Anthony at Tuthills is to pull the spark plugs out, crank the engine until the oil is up to pressure, then put the plugs back in and fire it up. I need a decent battery for that and my compact Odyssey PC680 battery is totally shot so I have a new one to fit. To fit the new unit, first I had to get the old one out.
Porsche 911 Battery in Smuggler’s Box (not RHD)
This little Odyssey lives in the smuggler’s box held secure in a tidy aluminium mount. I fitted this as a younger, more flexible person, so my 48 year-old self had a good curse at that idiot while trying to get this all out single-handedly. Whatever possessed me to stick it down here I do not know! Funny how it all changes in ten years. Anyway, half an hour later I had it out and in the boot of the Cayenne. I have a new Odyssey battery here so will stick it on the charger overnight and fit it later in the week.
A quick look at the battery showed my pretty aggressive boost charging of it last year to try and start the car had done the battery no favours: the centre is totally distorted. No big loss as it was not responding to a charger by then anyway, but it shows how little tolerance for misbehaviour these things have.
I do like the lightweight battery ethos in this lightweight 911, but am going to have to be more regimented about using a maintenance charger on it. Not leaving the car sitting around for years would probably also be a good idea. My nice bright damp-free new garage at home will help!
by John Glynn | Aug 18, 2015 | Classic Porsche Blog, Market & Prices
Regular readers will know that I occasionally sell classic Porsche cars for friends. My designer friend James has asked me to sell this interesting 911 for him, due to lack of time to use it (car is now sold – thanks all). It’s a 1985 Porsche 911 3.2 Carrera Coupe with above average mileage, but it’s had a huge amount of work done professionally and is now a very nice car. I’ll be putting it on eBay and Pistonheads later, so get in touch if it’s something you’re looking for.
Porsche 911 Restoration
Bought by James in 2007, this right-hand drive 1985 911 Carrera showed 185,000 miles on the clock, had been much enjoyed by its one previous owner and needed some restoration. James took the car to Tuthill Porsche and had the bodywork restored: the front wings were replaced, and common impact-bumper 911 rust spots like the inner front wing tops, front bumper mounts, windscreen apertures, sills and kidney bowls were repaired before the car was repainted in its apparently original colour of Viper Green.
At this time, the aluminium bumpers were also replaced with lightweight Ruf-style bumpers: anyone who has taken the bumpers off their impact-bumper car knows how much weight that saves and how much better the car feels to drive. Impact-bumper blades could easily be refitted if one preferred that style, or fit Speedline wheels for the full Ruf look.
Classic Porsche Maintenance Costs
The original colour is Speedway Green, which is a shade away from its current colour. Greens like this were not offered on 3.2 Carrera Coupes, so consider this car one of one. I have the bills for the last seven years and more than £10,000 has been spent on mechanical upkeep at Tuthills, including a full gearbox rebuild with replacement crownwheel and pinion, and a recent service, new brakes, new Bosch battery and MOT, costing £1500. This does not include the body restoration or the engine rebuild, both carried out at Tuthills.
I spent most of yesterday driving this 911 and it is superb on the road: as good as any 3.2 I have ever driven. The rebuilt engine pulls cleanly and is very strong on power: a treat to use with that rebuilt Porsche 915 transmission. The interior is good: Grey Beige leather with electric front seat height, all working fine. Hand stitched extended leather to door pulls and storage pocket lids: another factory option.
Porsche 911 3.2 Carrera for sale
Seats are in good shape, with only minor bolster wear showing on the driver’s side. The 911 also has a Momo steering wheel, which is very nice to use. The sunroof works well, as does the optional rear wiper on the flat rear engine cover. Rear seats are in nice condition: no rear seat belts are fitted. The car has a Sony CD player and comes with the jack, compressor and the original toolkit (that needs restoration but a nice job for someone).
I had a good look around the car and found a few minus points.
- The sunroof seal needs replacing
- Crack in the front bumper under one side grille
- The leather dashtop has a small split to the left of the binnacle
- Optional black headlining sagging around the sunroof
- Front wiper arms a bit scruffy
- One rear floor carpet is missing: an aftermarket mat is in its place
- Heater works but service invoice notes that the flaps could do with replacing
Bodywork is always the big concern on a 911, and no 911 is rust free. Expect to do a bit here and there over the next five years to keep the bodywork in A1 condition. I can see a few little bits but nothing overly concerning. Other than that it looks a good example and drives exceptionally well on very good tyres. I will update this post with more history as and when it becomes available.
Classic Porsche 911 Prices
As for price, let me put my professional Porsche valuations hat on for this bit. Solid 911 Carreras in similar condition generally hit the market with 125-135k miles and now sell for about £38-40k privately. They also usually come with Fuchs wheels: a set would cost circa £1500. This car has clocked up about 25k miles since restoration, so now has 212k miles on the clock, but remember this Porsche has had a huge amount invested in its upkeep over the last eight years and I cannot fault how it drives.
Adjusting for the mileage, the absence of Fuchs – which most buyers will budget to fit – and making a generous adjustment for the condition issues raised above, I’ve set a selling price of £24,995 (now sold) to buy a great classic 911 that is ready to use right now.
The car is with me near Banbury. I can pick you up from the nearest train station (Banbury) or if you are up in Scotland or in Ireland etc, you can fly in to Birmingham and catch a direct train down to inspect. It is ready to drive home once taxed and insured. I can also organise transport to any UK port for overseas shipping. Contact me with any questions.
by John Glynn | Mar 19, 2015 | Classic Porsche Blog, Market & Prices
I walked into a Porsche showroom on Monday and found an old friend waiting to greet me. Not unusual to find friends in Porsche showrooms, but surprising to find this 1974 Porsche 911 Carrera tribute for sale, as part of me thought the original owner would never sell it.
I first met this Porsche 911 at Tuthill Porsche in 2008. The owner, Oli Wheeler, had bought a very nice silver E-reg G50 Carrera Coupe base from Chris Harris, and then started talking to Richard Tuthill about building a tribute car. He was besotted with a feature I had written for 911 & Porsche World magazine, entitled “Citrus Carreras”.
The story revolved around my own 1976 Porsche 911 Carrera 3.0 in Continental Orange, versus good mate Nigel Watkins’ Lime Green 1975 Porsche 911 2.7 Carrera, which he had used to win the Curborough Sprint Championship. My car is called Orange, Nigel’s was called Limey: hence all the title stuff etc.
To defend his racing crown, Nigel had put Limey on a bit of diet, fitting carbon fibre bumpers and spending a fortune on an engine rebuild and re-cammed mechanical injection pump, amongst other things. However, when he went to go racing back at Curborough, his composite bumpers put him in the same class as a full-carbon Lotus Elise and the like. The shine went off the 2.7 and he sold it to build a 964 RS (replica) for more sprinting, which he managed to sort quite successfully after first buying a real 964 RS, which he found too hard to go racing in. Oh, the conversations we had about that…
Anyway, Limey had gone in part exchange on the RS to another good guy: the charming Neil Dickens at The Hairpin Company. Neil sold it to one man, then bought it back, then sold it on to someone else. In between all his moving it around, he met me and photographer Matt Howell at Bicester for a day out, where we shot the feature that would captivate Oli Wheeler some time later.
“Oli wants to build one of these cars, but he’s not sure which to go for,” said Richard on the phone in 2008. “He loves your Orange, and loves Lime Green: can you bring yours down for him to look at?” In the end it was not needed: Oli went with Lime Green (Gelb Grün) as the colour for his build, in homage to Limey. Jamie and I later shot Oli’s car at Wardington for another 911&PW feature.
Oli’s car was built to a sensible budget. He’d just sold a Ferrari 430 and had a few quid to spend, which went on things like:
- Bare metal respray with some backdate cues: rear bumperette delete etc
- Engine fettle with Jenvey throttle bodies, Omex ECU
- SSIs and Dansk rear pipe
- Tuthill billet brake calipers
- Suspension overhaul
- Recaro Pole Positions trimmed in leather
I drove it for a day and enjoyed how the Jenvey ITBs had improved the driveability. Seats were just perfect, car rode a treat but I didn’t like the 16″ Fuchs that had been left on the car. It needed 15s. Oli had it for a few years before emailing to say he had traded it for a 996 Turbo plus cash, which surprised me then and still surprises me now.
Whoever had the car after Oli fitted the 15″ Fuchs it deserved in the proper daisy petal finish, and now the 1974 Porsche 911 Carrera tribute is for sale, priced at just under £70k. I’ve not had a close look underneath it, but being around this car still makes me smile.
by John Glynn | Mar 4, 2015 | Classic Porsche Blog, Modified Porsche Hot Rods
I bumped into Stéphane via the Cult of Porsche Instagram channel. He’s building a cool 1980 Porsche 911 SC backdate down in France, so I got him to send me some pics and explain his love for the badge.
“I’m 33, and live in La Rochelle in Poitou Charentes. I’ve loved Porsche since I saw one for the first time, maybe when I was 6 or 7. My father owned a 1966 911. It was the only “new” car he bought. He drove a lot of cars (Jaguar Mk2, R8 Gordini, Audi Quattro, Mercedes 190SL, Mustang…) but the 911 was his favourite.
“My dad lost his good situation at the end of the 1980s and never had the ability to buy sports cars again. For me, the Porsche 911 was only an unaffordable dream. I worked hard and hoped to have my own Porsche and take a ride with my father. Sadly, he died in 2010.
“I bought my first Porsche 4 years ago: a 2001 Boxster. A while later, I changed it for a 1981 Guards Red 911 SC. I then the red one to do some work on my house. In 2012, I found this 1981 Porsche 911 SC (above) in Perpignan with a 964RS conversion. Turns out it was in mint condition! I was not a huge fan of this colour, but it was a really good base for my project.
“When I bought it, I planned to respray it in black, with 17” Fuchs, but 17s are too heavy for my 204bhp 3-litre engine! So I decided to buy original SC bumpers and started to work on the body. One day, I some photos of the Gérard Larousse 70′ 911 and decided to backdate my SC.
“Inspired by the R Gruppe, Rod Emory, Magnus Walker, I made my own colour. The rest of the spec is like this:
- Front wings, hood, and bumpers are in poly, from Rennspeed
- Wheels: 7 x15 and 9×15 Minilite from Historika
- Tyres: Toyo in 205/50/15 and 225/50 15
- Bilstein Club dampers
- Wevo shifter
- BF Torino Nürburgring seats
- Schroth 3-point harnesses
- Nardi steering wheel
- RS style door cards (homemade)
- Aluminium grille on the rear (homemade, inspired by Kremer)
- Dual chamber stainless steel exhaust (no brand, probably homemade)
- Powerflex Black Series Bushes
- Goodridge brake hoses
- EBC Red brake pads
“I think the next stage will be adding a roll cage in a few months. I’d love a PMO conversion with 964 camshafts. Until then, I’ll drive, drive, drive and enjoy my new toy, hoping my father can ear my flat six.”
An excellent project and no doubt dad would love it: well done mate. Follow Stéphane on Instagram here.
by John Glynn | Jan 15, 2015 | Classic Porsche Blog, Modified Porsche Hot Rods
Swapped some good emails with Jonny, a fellow impact bumper 911 man earlier this week regarding an agreed insurance valuation for his newly-restored Porsche 911 SC. The car is just about finished, so it’s time to make sure that this investment is properly protected in case anything should happen. The car is absolutely lovely: well worth sharing on Ferdinand.
“The brief for the car was an ‘everyday’ hot rod based largely on standard components and some period accessories – hence ‘stock rod’,” says Jonny. “The car as purchased was scruffy but largely sound. The shell needed repair to both kidneys, sills, one inner wing and the oil tank aperture.”
Porsche 911 SC Hot Rod begins
“I contacted well known body man, Barry Carter, about tackling the bodywork. He was at the right end of the country for me and has done some lovely metal restoration on 911s. Barry’s mission was ‘search and destroy’ all rust. After a lot of detailed repair work, I believe this has been accomplished.
“While Barry was working on the rust problem, he also addressed the metalwork in other areas that I was changing, to make the shell perfect. This included a mirror hole delete, side skirt delete, side repeater delete, rear fog light delete, front spoiler delete and rolling the wheel arch edges.
“When the bodywork was done, I stripped the car back to bare metal myself and the shell then went to Steve Utting at DC Coachworks. Steve carried out a complete colour change to Porsche Delphi Green – a 914 colour, similar to some 911 shades. The new paint extends to the wheelarches, engine and luggage bays.
“Former Paragon engine builder, Lee Colbran, rebuilt the engine with standard pistons and cylinders (rebored and Nikasil coated) 964 cams, and SSI heat exchangers. We also backdated the heating: taking the secondary air blower out of the engine compartment. I rebuilt the Bosch K-Jet CIS injection and had the fan and housing refurbed. Mike Bainbridge rebuilt the transmission for me, also fitting a Quaife LSD to the car.
“There’s nothing wrong with standard SC brakes, so no upgrade was necessary. I had the calipers reconditioned by Classic Brake, and replaced every part of the braking system. All the suspension was also removed, stripped and refinished in the correct plating or powerdercoat. New suspension bushes are a mix of standard and Superpro, as this is not a track car. Rear torsion bars went to 26mm, with a 22mm front anti-roll bar. Turbo tie rods were fitted to my 911 SC, as they make a difference.”
Jonny is an electrical engineer, so there are some clever bits and pieces on the electrical system – more on that in a later post. The interior is very period, with the original brown dash, door caps and trim, some manual Porsche sports seats and very smart Mercedes “Brazil Brown” carpet, as it tones well with the Porsche palette. The door panels and rear quarter trims are covered in “Domino” Alcantara. Rear seat backs have been deleted but the handy “jump seat” cushions are still in place.
Kudos to Jonny for getting in early and snapping up an SC before prices went crazy, then working his way through a detailed “update” restoration so the car can be used every day. Undervalued for far too long, the 3-litre 911s are still my favourite and I love what Jon has done with the Delphi Green stunner. Looking forward to having a drive sometime soon.
