by John Glynn | Jun 18, 2014 | Classic Porsche Blog, Market & Prices, Project Cars
Loyal readers of my original Classic Porsche Blog may remember the story of when Porsche 911 parts I bought on eBay were flown to me in person. I just found some of the old pictures and thought it was worth a re-blog.
eBay Porsche Parts Shipping
In need of some parts for The Varmint – a Porsche 911 SC Coupe I had bought in San Francisco on Craigslist, used in California and shipped back to England – I went on eBay and hunted around. I needed a door pull, door pockets and a few other bits. Peter had been backdating a 3.2 Carrera and was selling all the parts I needed on the auction site. He also had a few other NOS parts including a headlamp washer pump and some light lenses.
We did a little deal on the lot, I gave him my address and he went off to get a price on the postage. I had an email ten minutes later. “Are you near Silverstone and free tomorrow?” I’m just down the road from Silverstone, and I work from home, so that was no problem. “Meet me at Turweston and I’ll have the parts with me,” said Peter.
Turweston Aerodrome
Just a few miles from Silverstone circuit, which was a huge aircraft base in the war, Turweston also served as an airfield in WW2. Wellington, Avro Anson and USAF Mitchell bombers flew from its three runways (including a 1.6 kilometre-long strip still used for F1 car and MotoGP motorbike testing) until the aerodrome was closed at the end of 1945. After that, it was used for MoD storage until reopening in the 1990s as a private airfield. It’s where most helicopter taxi rides into the British Grand Prix start from.
It turned out that Peter was the only qualified town planner in the UK who specialised in airfield planning and permission issues, and Turweston was one of his clients. He had flown up from Kent in his Europa 2 Tri-Gear light aircraft and brought my eBay 911 parts with him: I was knocked out by the service.
Driving the distance would have taken more than two hours. Flying took less than a quarter of that, with a lot less fuel used also – the 100hp Rotax 912S engine in Peter’s self-built Europa uses as little as 6 litres per 100 kilometres while cruising, so about a gallon of fuel to get to me. It was a very cool experience: I know lots of Porsche guys are pilots too, so thought I would share pics of the aircraft.
Of the Europa 2, Peter says “The Europa offers a rare brilliance in light aeroplane design and handling. There is very little in the marketplace today that offers so much performance for so little cost in maintenance.” The car is, of course, my 1976 Porsche 911 Carrera 3.0 Coupe in Continental Orange. Sits well against the white and blue paint scheme, with the orange on the tail. Here’s some video of Peter’s plane in action:
by John Glynn | Jun 17, 2014 | Classic Porsche Blog, Modified Porsche Hot Rods, Project Cars
Fellow Porsche hot rod fans will totally get this Porsche 911 Targa Speedster. Originality crew, avert your eyes now.
Vincent in Colorado emailed me last night with pictures of his Porsche street rod creation. Known affectionately as ‘Butzi’, it’s a lightweight Speedster-style project, based on a 1971 911 E Targa. Inspired by a visit to the Porsche Museum, close inspection of the 550 Spyder and 909 Bergspyder hillclimb special drove Vincent to create a lightweight version of his early 911.
Hot Rod Porsche 911 Targa Speedster
“I bought my 1971 Porsche 911E Targa in California on 9/11, 2000. Always maintained by Andial, the car had been stolen from its previous owner, but subsequently recovered. While stolen, it had picked up body damage: a smashed front wing and door, clipped in a collision. Now far from immaculate condition, it was ready for a transformation along the lines of home-brew early race cars.
“I welded in rear flares to fit 8 x 15” Fuchs wheels, and added lightness to the entire body. Fibreglass bumpers, bonnet, deck lid, and front fenders keep with the lightweight build theme. I have yet to weigh the car, but you can be sure it’s in the 1800 lb range (800 kilos).
eBay Porsche Parts Find
“The most challenging part of the build was committing to the Speedster theme. This required removal of the original Targa roof components and fabricating the windshield. I got lucky and found the rear clamshell on eBay.
“Powered by the original 2.2-litre engine, refreshed and on Webers with the 901 transmission, I’m enjoying driving it, but have to start work on the suspension and get some ideas on paint. Originally silver, I really like the early Porsche race cars in white, hence the theme it is now: in various shades of white primer, awaiting the next stage.”
As a Porsche feature car veteran, I like the hot rods: cars with personality. I rarely get super excited by perfect Porsches that the owners won’t drive due to spotless condition. For me, a Porsche on the move is the real deal: even Zuffenhausen drives its museum exhibits every now and then.
Vincent’s 911 Speedster is towards the opposite end of the Porsche preservation spectrum, but this doesn’t make it less engaging. It’s a work in progress, and sometimes progress has to shake a few cages. Kudos, Vincent and Salut, Butzi. Keep on rocking in the free world!
![Impact Bumper 1977 Porsche 911 2.7-litre S Trending]()
by John Glynn | Jun 12, 2014 | Classic Porsche Blog, Modified Porsche Hot Rods
In February 2006, I started a website called Impact Bumpers. Based on a suggestion by my mate, Tripe, it was a forum for Porsche guys into aluminium ‘impact bumper’ 911s from 1974 to 1989: what we quickly christened the ‘IB’ 911.
Back then, the cars were unloved by Porsche clubs and there was no place outside Pelican for owners to congregate. My aim was to get twenty guys together who liked working on their own cars and would do a few events every now and then (I had a secondary agenda of lifting regard for the 911 SC, but that’s another story). Eight years later, impactbumpers.com is still going strong, with thousands of Porsche fans online every month.
Just as the SC was looked down on back then, so the 911S also suffered. Built pre-SC with narrow rear quarter panels, the S has a lowly 2.7 litre engine, strangled by K-Jet and emissions exhaust, normally making just 165 bhp. Without the SC’s RS-style arches, it was neither fish nor foul – no pretty early bumpers and no chunky IB rear. On the cusp of full galvanising, many 911S bodyshells rotted away and were not worth repairing. No doubt the narrow body had style: but its moment to shine would just have to wait.
That moment has arrived in 2014. As a mark of its rising regard, two R Gruppe friends have each bought impact bumper 911S models in the last seven days and both plan to keep the appearance as-is. They’re not the first narrow IBs in an R Gruppe garage, but it goes to show what people are up to.
1977 Porsche 911 S
The car seen here is Joey’s in Northern California. “I just got this rather pedestrian narrow body US version 911S coupe,” says Joe, “not normally on my radar but what got me off the fence was the color combo of Minerva Blue with Cork interior. Also it’s a full delete package from the factory: sans sunroof and power windows, with driver side-only manual mirror.”
I love that Joe thinks poverty spec was an option (!), but what a cool 911. My first 911 (SC) was almost going to be the same colour combination, as it really pings in the metal. Joey is looking at mods that will keep it low-key: a bit of a sleeper. 3-litre power is likely, with SSIs adding a bit more grunt.
Personally I would fit modern air con, take weight off stealth-style with aluminium panels, lightweight bumpers and run it as-is, but it’s not my project to build: I’ve got my own narrow-body Porsche 912E project waiting for that. But this 911S looks a beauty! I’m looking forward to having a drive myself sometime soon.
Got a new/old 911 you want to share? Send us some pics: mail@ferdinandmagazine.com. We’ll feature the best ones.
![Impact Bumper 1977 Porsche 911 2.7-litre S Trending]()
by John Glynn | Jun 8, 2014 | Classic Porsche Blog, Market & Prices
Flicking through Instagram this morning, a 356 friend on there posted this picture of his stunning Coupe. Turns out the colour is Aetna Blue – a new one on me, available on 356s for just two years: 1960/61. Porsche paint names intrigue me, so I got onto Google.
You’ll have guessed that Aetna is a Greek word. In classic mythology, Aetna was the daughter of Uranus and Gaea: nymph goddess of a Sicilian volcano said to entomb the giant Typhoeus, whose frequent restlessness led to the eruptions from the mountain, and terrifying earthquakes that shook the island.
That Sicilian volcano is, of course, Mount Etna. It is easy to understand how a sojourn alongside the Sicilian coast could have led to this rich melt of sky and sea finding its way onto a svelte 356. Continuing the Google led to a thread on Rennlist, which once again proved to me how small this Porsche world is. But that’s another story.
Marc L in Houston, Texas shared how he had bought this used Porsche 991 C2S manual from a Houston Porsche dealer, in paint-to-sample Aetna Blue with Espresso leather and wood trim. Apparently the car had covered less than a thousand miles but had come back in soon after delivery, as part exchange on a C4S 911. Numerous local Rennlisters contributed to say it had been at the dealer’s for a while: the unique colour and trim proving difficult to sell.
Marc walked in looking for a Cobalt Blue 997 Turbo, but was struck by the luxurious combination of this custom-built 991. While there is the usual backlash on the thread against the wood trim, seeing these things in person is a totally different experience. No surprise Marc was smitten, buying it on the spot.
The original owner of the Aetna Blue 991 also chimes in to the thread, sharing how “that vintage feel is what I was looking for. My dealer would never order wood in a 911 but after this car they’ve done it several times. With the right colors it looks good.”
Porsche’s paint to sample facility is a wonderful thing. A skilled aesthete can build a beautiful car that would be kept forever. It can also go exceptionally wrong, of course, but to me this 991 sums up the best of modern Porsche. Perhaps it also shows that the 991 is now a car for fifty- rather than thirty-somethings (I’m at the wrong end of that scale), but now the young folk have the Cayman and Boxster, let all 991s look as special as this. It’s my favourite 991 to date.
by John Glynn | May 26, 2014 | Classic Porsche Blog, Project Cars
I recently encountered this very tidy Porsche 911 3.2 Carrera Turbo Look. The car was brought in to a Porsche specialist to inspect a noisy wheel bearing, but the issue has turned out to be slightly more serious.
The giveaway was a problem pushing the car more than a few feet before it would lock up and go no further. Pushing it back a little and then forward, it would roll on another bit before locking again. The prime suspect is the diff, which could be in trouble. Unusual for a 3.2 Carrera you might think.
Pull the engine cover release, lift the tea tray fitted to these Turbo Look Carreras and one possible explanation for the diff woes is uncovered: a whacking great supercharger bolted to the crankcase. We likey very much.
This blower is an Eaton, also used on some Jaguars. The supercharger is the same one being used on a supercharged hillclimb Porsche Cayman with sequential transmission – more on that later – but the install is quite different. I think I may know where it was done: currently gathering some more information.
Paxton Supercharger on Porsche 911
When I first got into Porsche, one of the very first 911 guys I met was John, who owned a very smart 3.2 Carrera in one of the dark blue metallics. John lived in London and owned a supercharged 3.2 Carrera Coupe, using a Paxton blower.
I vividly remember one run up the M1 to Donington Park for a private museum tour. I was on the inside lane, he was in the middle. Sitting at 85/90 mph with the roof and windows down on my SC Cabriolet, John was on and off the throttle, giving me the full supercharger/eardrums experience: pretty exciting.
Horsepower from Supercharged Porsche 911
Pelicanites who have supercharged their 3.2s with Whipple, Paxton or Auto-Rotor blowers claim to be seeing up to 425bhp at the flywheel from the add-on. 400 horsepower in a standard Carrera would be a bit of a handful. At least the Turbo Look 911s get the proper 930 brakes and suspension, plus the chunky tea tray tail to hide this install and control the rear lift at speed.
More common power from a supercharged 3.2-litre 911 (US spec motor) is 340-360bhp, with instant torque and plenty of attention from the boys in blue if you don’t watch the right foot. Owners report the main consequence from the added power as drastically shorter transmission life.
I’m excited to see this car in a bit more detail, and what the transmission looks like when dissected.
