by John Glynn | Apr 9, 2013 | Classic Porsche Blog, Porsche News, Project Cars
Had some nice feedback on my latest 924 Turbo maintenance piece: thanks for that. I finally heard back from Porsche GB on getting a build date for the car, so I sent off my £65 for a Letter of Origin. Should be enough to register it here once it’s MOTed.
While writing the cheque for Porsche Cars GB, it occurred to me that Italy must have a HPI system for its cars, so I googled that and found the Automobile Club d’Italia (ACI) website. It’s the only source of info for Italian cars, and looked great. If you speak Italian and have a Codice Fiscale (Social Security number), you can find out anything you want about a car for a modest fee.
Much as I love Italia, I have neither the language nor the residency to go all the way with ACI, but Google Translate helped me find a section of the site to check tax status on a car registered in Italy. My 1980 924 Turbo carries the reg prefix RA, which is Emilia-Ravenna district, but the tax site showed it as last registered in Sardinia. The ragu thickens.
Amongst the nondescript paper shrapnel pulled from the car, I did find a stack of business cards from a bodyshop in Cagliari, capital of Sardinia. I emailed them a few months back but heard nothing in return. It’s obvious that they painted it, many moons ago.
The paint is now shot to pieces, but at some stage it probably looked OK. This led me to searching 924 Turbos in Cagliari and finding more Italian 924s with these Fisher-Price indicators on the front wings. I’m probably taking them off mine when we paint it: wonder who at Porsche Italy thought they were the right way to go.
Anyway, Sardinia Car Tax Online says this car was registered 1/1/1980, so I am guessing there was no official production date put forward when it was registered there. I could try to register it using the paperwork I gleaned from the ACI site, but I’ll wait to see what £65 buys me from Porsche: I’ll be cross if they also say 1/1/1980.
At least I’m now sure that rust-free chassis is because it lived in the sun for ages. I know it’s nothing special to most people, but I really like this car.
by John Glynn | Apr 8, 2013 | Classic Porsche Blog, Project Cars
Just watched a terrific Storyville on BBC4. Entitled “From the Sea to the Land: Beyond Britain’s Coast on Film”, the programme gathered up 100 years of archive footage, to tell the story of 20th Century Britain’s relationship with the sea that surrounds it. With a thought-provoking soundtrack playing in accompaniment, it was spellbinding television.
The most impressive part for me was a shipyard section filmed in the 1960s, with amazing cinematography showing the scale of some of the vessels being built, when the UK still made the world’s greatest machinery. Deeply impressive on a multitude of levels.
The age of great British fabrication was briefly revisited on Saturday, when I finally managed to strap best mate Rob Campbell at Racing Restorations to his lathe for long enough to make a bush for my 924 Turbo’s steering rack. The 924 car failed its UK MOT on steering play, ascribed to a track rod but wound up being the bush in the end of the steering rack: those bumpy Italian back roads roads taking their toll.
I was happy to go and track down the part, but Robert insisted he could easily make it. Sorting this is the penultimate job before registration: all I need now is a set of tyres fitted, a retest on the MOT and official confirmation of date of construction, and it’s off to the DVLA with some paperwork.
In true OTT John & Rob style, the plastic bush I pulled out out of the Volkswagen steering rack – worth about 50p on a good day – was replaced with something that took rather more expense to manufacture. Robert turned it out of solid brass, giving me an hour’s entertainment and something good to blog about.
If you’ve ever seen brass being machined, you know it goes everywhere in splinters. But all metal is amazing to watch in transformation. Careful measuring throughout Operation Overkill meant the rack all went back together with no big dramas. I’ll get it back in the car sometime next week.
by John Glynn | Feb 27, 2013 | Classic Porsche Blog, Modified Porsche Hot Rods
Here’s an interesting read for you: the first feature Jamie Lipman and I ever did in the USA from 2008. Was a minor disaster getting there and making this happen, but the end justified the means. R Gruppe Porsche 911 SWB Hot Rods shot in California.
Interest in the short wheelbase 911 has surged in recent years. John Glynn drives a pair of American beauties that make a convincing case for less is more.
Ah, California. In stark contrast to preconceptions of a concrete jungle, California is a state with personality. Away from the major population centres, amazing light and fresh Pacific air mingles with the blissful aroma of pine trees and vines to create a technicolour environment. No wonder they built Hollywood here.
I’ve come to the Golden State to attend the R Gruppe Treffen, an annual ensemble of early 911 enthusiasts from across the US and beyond. This year, the meet is centred on Cambria, a pretty little coastal town 100 miles south of Monterey. This is the site of the very first Gruppe get-together, ten years ago.
R Gruppe’s raison d’etre is to honour the intent behind Porsche’s Sports Purpose range: factory parts for adding that extra zing to to the pre-’73 911. This is a club for road trippers, not trailer queens. Some of these guys have travelled almost 3,000 ground miles to be here. (more…)
by John Glynn | Feb 21, 2013 | Classic Porsche Blog, Project Cars
Finally found time last week to get on the road and visit my Porsche 944, which has been parked in a mate’s farmyard for a few years while I get this Ferdinand thing off the ground.
You might remember I bought the 944 for its 911 number plate a few years back. It had been parked up for ten years in a soaking wet garage. I knew it needed a few bits repaired, which then turned into plans for a full restoration.
I subsequently broke two front-engined Porsches – 924 and 944 – for spare parts that might be needed, and the whole lot is stockpiled. I’m not in any rush to do this job, but am certainly glad to have a simple early 944 put aside, as Porsche is not making any more of them. Though this project is not a priority, it’s nice to check up on the car every now and then.
Above is the sight that awaited me – the Porsche being swallowed by a hedge. It’s sitting on gravel, so the underside is still dry, and better it is well ventilated than in some damp garage or barn. Nevertheless, I’m going to drag it back to Porsche rust repair experts Racing Restorations at Pershore sometime soon, and allow Rob Campbell to work his metal magic.
Robert and I have been friends for over twenty years, so have done plenty of projects together. The team of guys there do exceptional metalwork, and the restoration repairs will be invisible.
Racing Restorations replaced a lot of mothy metal on my E36 BMW M3 saloon/sedan restoration last year (above). I’m super pleased with the M3 now, so I’m looking forward to getting this 944 project started.
by John Glynn | Jan 29, 2013 | Classic Porsche Blog, Modified Porsche Hot Rods, Project Cars
The Porsche 912 Speedster from a few days ago went down a storm on Ferdinand Magazine’s Facebook page, which is heading towards 50,000 likes. I’ve got some more details to share on the custom 912, which previous owner Ryan tells me now lives with another friend of mine in Belgium. Small world!
The builder of this 912 Speedster had previously developed some successful race cars. He chose the 912 as it was lighter than a 911, it was a four-cylinder like the 356 Speedster, and the shorter four-cylinder engine mounted close to the firewall gave a lower ultimate height across the engine, which would help it achieve a lower rear deck line.
No computers were used to shape the body: just very careful measuring. After the roof was cut off, Wilbur Brothers bodyshop in Stockwell, Indiana removed the bodywork above the rear wing tops and replaced with a cowling constructed from two Karmann Ghia panels, which gave a lower rear end and less rake.
Like the 356 Speedster’s engine cover, this 912’s rear lid is a hatch that does not extend to the lower rear panel. It was made by welding the 912’s engine cover in place, mating two Ghia engine covers together, then cutting a hole for the 912 grill: an interesting solution.
Modified Speedster windscreen posts hold the shortened 912 windshield. The glass-free doors have custom door caps and plexiglass side windows.
To strengthen the chassis, metal plates were welded to the A-posts. Steel box section was welded into the sill sections, from front to rear wheel housings. The car went through a complete restoration and then had a fresh coat of red. Can’t wait to see this in the metal one day.
