by John Glynn | Jul 20, 2014 | Porsche Cayenne, Project Cars
If I ever recover from our last family holiday in the Cayenne (to Ireland last Easter) enough to want another one, and we take Ted the Jack Russell Terrier, he will get half the boot space. With four women ready to fill up the other half, I’ve been looking for a roof box as a just-in-case measure.
New Porsche roof boxes are silly money, so a used box is the obvious solution. eBay is usually the best place to find used Porsche accessories, and I’ve had a saved search for Porsche roof boxes running for a while. A quick flick on the search one lunchtime last week found a black Porsche roofbox out in Suffolk. Looking at the seller’s other items, he also had a set of 19″ Cayenne wheels with winter tyres.
eBay Porsche Wheels and Tyres
Having finally killed off the part-worn winters from last year, I needed replacement winter tyres and I wanted a roofbox, so one quick email offer later, both items were mine. I arranged collection for the following morning and duly set off after dropping the kids to school. It’s a 200-mile round trip from here to Suffolk on the east coast of England. Sat nav said a couple of hours with a few country short cuts, some of which turned out to be excellent roads. Noted for future 911 drives.
One great thing about Porsche ownership is the variety of interesting people who run around in these cars. Having met undertakers, dentists, truck drivers and more through buying and selling Porsches and parts, this latest deal was with Sean: an obviously talented property developer.
Sean’s place (above) was an amazing manor house. Seemingly 150 years old, it turned out to be a new build using carefully chosen materials. As someone who is still buying reclaimed building supplies for an ongoing Victorian house rebuild, the house appeared to have stood since the 1850s or earlier. It was absolutely beautiful: the pics are from the architect’s website.
We fitted the roof box on its Porsche roof rails and threw the wheels in the Cayenne. Ted approved of the boot space (below): now all we need is a boot divider for him. And some space to store this massive bit of luggage. Shouldn’t be a problem when the garage is built.
Modern Cayenne not as Well Built as Original
Sean was selling the roof box, as he had recently bought his third Cayenne, but the new Porsche Cayenne doesn’t come with the roof channels required to fit these boxes. A previous owner of a V8 like mine, a Turbo and now a new Turbodiesel, he felt that newer Cayennes had been lessened by removing items found on early cars, to make new cars easier to manufacture. This included the roof channel system and raised windscreen edges: the lack of which allowed water to run straight in through open front windows. Wet shirt sleeves are not appreciated when you’ve shelled out sixty grand or more on a car.
A similar thing happened to early BMW Minis. BMW couldn’t make money retaining the substantial build quality of the first production examples, so the cars got cheaper to build over time. It’s also said that lowering production costs was one motivation for the transition from air-cooled to water-cooled 911s, but let’s not go there.
Porsche Roof Box is a Thule Product
Having since spent an hour refining the fit, sliding it forward a bit to clear the DAB aerial and allow the boot to open fully, the roofbox – which is a Thule product, painted in black and rebadged as Porsche – fits the Cayenne really well.
Screwed to the genuine roof rails/cross bars using custom fittings, it opens from both sides and is rattle-free over bumps. There’s a bit of wind noise at 90mph and a minor impact on fuel economy, but no more than 10% lost. I’ve run with it for five days now and been impressed. A good buy for £200!
by John Glynn | Jul 17, 2014 | Project Cars
One big problem with the Porsche Boxster is caused by its defining feature: that convertible roof. The soft top needs regular maintenance, just like the rest of the car.
Even in the UK’s water-dominated climate, a Boxster’s convertible roof sees regular use and is exposed to plenty of stress. Controlled by a series of cables, over time these cables can slip out of adjustment: the tell-tale being a rattling sound behind the driver. If the roof cables are left unadjusted, the mechanism invariably starts to malfunction.
This would not be such a serious issue, except that if the roof is left without attention for a prolonged length of time, the drain tubes for the hood box that the roof folds into can get blocked by dirt and debris. The roof box then fills with water, which usually enters the car directly overhead electrical control boxes situated in the left rear floor.
The Boxster above had a lucky escape. When the car started leaking water, the owner brought it in for a look. The water had entered the car due to blocked roof drains, but only on the right side, missing the expensive control boxes (phew). The roof box was checked and the problem was found. A pop-on ball connector for a hood cable had fractured and – as the perfect size and shape – dropped into a drain tube and blocked it.
This was the first such hood box blockage I have seen, where the ball connector caused the problem, but where there’s one failure, there are many more like it waiting to happen! When servicing your Boxster, have that hood adjusted and lubricated, and make sure the garage checks the drain tubes. It could save a fortune in the long run.
by John Glynn | Jul 9, 2014 | Classic Porsche Blog, Modified Porsche Hot Rods, Project Cars
Love these new Porsche 911 anti-roll bars (sway bars) from our friends at EB Motorsport. Sold in matched pairs for front and rear, the front ARB runs through the body, while the rear is suspended across the chassis using the original mounts.
“The EB Motorsport anti-roll bar set has been developed on our own cars in racing,” says EB’s Mark Bates. “Front and rear bars are available in various sizes: 22mm is the most popular size for 3.0 RS and RSRs like our race cars. We use hollow bars as we prefer the characteristics. The ARB stiffness is fully adjustable.
“The EB Motorsport anti-roll bars feature elegantly simple engineering. The bushed mounting system on both front and rear installations is less likely to distort in extreme conditions. Consequently, it resists “grounding out” as many other ARB types are prone to when under high load, such as at the bottom of Paddock Hill, at Brands Hatch.
The original design of this product is multi-piece aluminium, TIG welded. The bushes used by these EB Motorsport Porsche 911 anti-roll bars are a modern polymer equivalent to the original Delrin Acetal resin. Drop links are beautifully machined from aluminium and anodised. Cross drilled moment arms allow for easy adjustment. All connections feature rose joints with machined spacers, to allow free movement.
Some friends of mine use the Smart Racing rear ARB on their classic Porsche 911 for track days, and I have definitely seen those ground out at Paddock. In fact, I have even seen the rear tyre rub against the inside of the wheelarch through that compression zone and burn the paint off the outside of the arch on a 3.2 Carrera. It’s a pretty intense Porsche workout around Brands Hatch! Impressive if EB has found a way around the issue.
The EB Motorsport anti-roll bar kits retail at £1215 ex-works. They are suitable for most early cars, and all 911s up to 1989 with some modification to front fitment: impact bumper 911s are not through-the-body as standard. Contact EB Motorsport via their website to find out more.
by John Glynn | Jul 6, 2014 | Classic Porsche Blog, Modified Porsche Hot Rods, Project Cars
Many of you will probably wish there were different wheels on this Porsche 356 Outlaw, recently spotted at an EASY Porsche meet in San Francisco. I reckon they are covering a brake upgrade – especially given the drivetrain changes – but no doubt this is an interesting car.
Super smooth bodywork with some urban stealth touches: grey primer with wiper delete, and Michelin Pilot Sport Cup rubber wrapped around those twist rims, the pics came from my buddy John G up in northern California. JG recently picked up a dune buggy body, and the emails have been flying on plans for chassis and drivetrain.
Air-cooled is obviously the only way to go for power, and JG likes the flat-four seen here. “I think I found what I want for a dune buggy motor this morning. Type 4 VW with Webers and Porsche shroud and vertical fan. This one was a bus motor, taken out to 2.7-litres. But super clean, no wires showing, nothing but the good stuff. Very cool: me likey.”
Me likey too. Dune buggies have been a bit of a thread around here lately, with a big buggy rebuild project in progress alongside my Porsche 911 Carrera 3.0 at Racing Restorations. Rob Campbell has built a complete safety roll cage with seat belts for the owners and his kids, and sorted a lot of original fabrication issues.
I had a chance to drive the dune buggy around the estate before it was picked up, and that was a tick on the bucket list. I’ve always had a thing for dune buggies. Now that the mid-life is in full swing, I’d sort of enjoy having one for the odd days of good weather we see in the UK, although I prefer the shorter wheelbase models.
Looking forward to having JG’s buggy sorted in California. No doubt it will be a project for many years yet, but that will be a laugh when it’s finished!
by John Glynn | Jul 4, 2014 | Classic Porsche Blog, Modified Porsche Hot Rods, Project Cars
Happy 4th of July to all my friends in the USA! Hope you all have a great day. My last post was on Lewis Hauser’s Porsche 356 Sportolet. Lewis sent me a nice story afterwards of meeting Doctor Wolfgang Porsche with the 356, which is well worth sharing.
“I can’t believe I forgot to mention meeting Wolfgang Porsche! It was at the 50th Porsche Parade in Hershey, PA. We ran into some of the Porsche family members looking at the car. One of them was Wolfgang Porsche, who said he thought it was one of their original prototypes and that it was beautiful.
“Dr Porsche was a very nice man. He also talked with me about my ’55 coupe that was at the first Parade in 1956 and on display with the other historic Porsches that weekend. He liked it because he could tell that the car was driven regularly. He said that his father intended for Porsches to be driven, not scrubbed with Q-Tips.”
One man who is definitely not a Q-Tip scrubber is the Sportolet’s current owner: Rob Abbott in Maryland. Rob has a number of vintage Porsches, including the superb ST rep seen here. It was built by another pair of non-Q-Tippers, Dave B at TRE in Los Angeles and our hot rod hero, Hans Lapine at Kundensport.
“This project started with a very nice, original Signal Orange 1971 911T,” says Rob. “Having spent entire project budgets just sorting out previous rust-ridden 911s, we decided to start with a good car. The idea was not to build a perfect ST replica – no two were alike, in any case – but something that could have been ordered from the factory by someone with connections.
“All the bodywork was done at Kundensport. The car is mostly steel bodied including fenders (wings) and bumpers, which were cut and formed to the fenders, and slotted for the Carrera oil cooler. It has an aluminum rear deck lid and a factory-style balsa-reinforced fiberglass hood.”
The interior is super trick, and the engine is a hot rod 3.2 running PMOs. I’ve got some more build pics and detail shots from Rob to share later. For now, enjoy July 4th and the pics of this pair together on a Pacific coast drive during R Gruppe Treffen. Looking great!
by John Glynn | Jun 18, 2014 | Classic Porsche Blog, Market & Prices, Project Cars
Loyal readers of my original Classic Porsche Blog may remember the story of when Porsche 911 parts I bought on eBay were flown to me in person. I just found some of the old pictures and thought it was worth a re-blog.
eBay Porsche Parts Shipping
In need of some parts for The Varmint – a Porsche 911 SC Coupe I had bought in San Francisco on Craigslist, used in California and shipped back to England – I went on eBay and hunted around. I needed a door pull, door pockets and a few other bits. Peter had been backdating a 3.2 Carrera and was selling all the parts I needed on the auction site. He also had a few other NOS parts including a headlamp washer pump and some light lenses.
We did a little deal on the lot, I gave him my address and he went off to get a price on the postage. I had an email ten minutes later. “Are you near Silverstone and free tomorrow?” I’m just down the road from Silverstone, and I work from home, so that was no problem. “Meet me at Turweston and I’ll have the parts with me,” said Peter.
Turweston Aerodrome
Just a few miles from Silverstone circuit, which was a huge aircraft base in the war, Turweston also served as an airfield in WW2. Wellington, Avro Anson and USAF Mitchell bombers flew from its three runways (including a 1.6 kilometre-long strip still used for F1 car and MotoGP motorbike testing) until the aerodrome was closed at the end of 1945. After that, it was used for MoD storage until reopening in the 1990s as a private airfield. It’s where most helicopter taxi rides into the British Grand Prix start from.
It turned out that Peter was the only qualified town planner in the UK who specialised in airfield planning and permission issues, and Turweston was one of his clients. He had flown up from Kent in his Europa 2 Tri-Gear light aircraft and brought my eBay 911 parts with him: I was knocked out by the service.
Driving the distance would have taken more than two hours. Flying took less than a quarter of that, with a lot less fuel used also – the 100hp Rotax 912S engine in Peter’s self-built Europa uses as little as 6 litres per 100 kilometres while cruising, so about a gallon of fuel to get to me. It was a very cool experience: I know lots of Porsche guys are pilots too, so thought I would share pics of the aircraft.
Of the Europa 2, Peter says “The Europa offers a rare brilliance in light aeroplane design and handling. There is very little in the marketplace today that offers so much performance for so little cost in maintenance.” The car is, of course, my 1976 Porsche 911 Carrera 3.0 Coupe in Continental Orange. Sits well against the white and blue paint scheme, with the orange on the tail. Here’s some video of Peter’s plane in action:
