by John Glynn | Jun 4, 2013 | Classic Porsche Blog, Project Cars
Just had these preview pictures through from EB Motorsport of their all-new Deep 6 and 7R Fuchs reproduction wheels in polished finish.
The polished look has always seemed best to me on these rare rims, and EB wheels are designed and manufactured with exceptional attention to detail. Note how these wheels feature the safety bead missing from original Fuchs, and the correct detail around the valve stems, not seen on lesser reproductions.
The wheel centre and front face are machined from a single aluminium billet, with the forged rear barrel CNC-welded to the front section. I had a close look at these wheels in person last week. The finish is top notch and the curve of the spoke and rim edge is just perfect: these are really lovely products. Why risk your original wheels? Get a set of these on and mothball the originals.
EB has so far won two Masters Historic Series championships using their strong and lightweight reproduction Fuchs wheels without incident: this is despite some heavy impacts, including a direct hit from a spinning GT40 at last year’s Silverstone Classic! Suffice to say that the design and manufacture is excellent, as we have come to expect from this perfectionist Porsche parts manufacturer.
Price for either Deep 6 or 7R reproductions is £1850 per pair. That is ex-works from Yorkshire HQ, so plus VAT and carriage where applicable. Contact EB Motorsport for more details and to discuss options on finishing etc. Remember, these are proper, high-end reproductions: not cast to keep cost down. Cast wheels are much heavier and raise too many questions on strength and quality/porosity.
SHARE • EXPLORE • SUPPORT
Ferdinand blogs my freelance adventure with Porsche at the centre. To support the blog or engage with me in other ways, you can:
by John Glynn | May 7, 2013 | Classic Porsche Blog, Project Cars
Just had a few pics through from the UK Fuchs distributor showing various classic 911 models owned by satisfied customers running the 18-inch Fuchs wheels.
This first one is from Brad in North America, running the RSR style on a 964. Fuchs make the wheels with offsets to suit the different 964 set up – looks lots better than the clunky Braid wheels often seen on other cars. DP showed a similar setup at Essen on their latest 964-based creation, albeit their wheels ran red centres.
This is Ian’s Carrera Cabriolet, running 18s with black centres. The car is fitted with a 3.6-litre engine so has the muscle to work those bigger wheels & tyres. Tyres are a big advantage to bigger wheels – more choice of rubber with bigger rims.
You’ve seen this before but I couldn’t resist another peek at the white 993 Coupe running 18″ Fuchs. This car is cool in white.
SHARE • EXPLORE • SUPPORT
Ferdinand blogs my freelance adventure with Porsche at the centre. To support the blog or engage with me in other ways, you can:
by John Glynn | Mar 3, 2013 | Modified Porsche Hot Rods, Project Cars
Hot on the heels of a day spent with suspension experts from KW Suspension, came a chance encounter with the EXE-TC experts at Tuthill Porsche.
Graham Gleeson is the brains behind EXE-TC: the suspension engineering company that has underpinned Sebastien Loeb’s many world rally championships over the last few years.
EXE-TC and Tuthill are closely linked in classic Porsche chassis engineering, and development on these joint projects is always ongoing. The EB Motorsport RSR and the Janssens dog box car are two Tuthill-built competition 911s that have run EXE-TC gear in testing, but road cars are also used to get street-biased products working properly.
The car seen here is an Albert Blue amalgam of classic components, combined by Tuthills to build one man’s perfect Porsche. This is running an EXE-TC development subframe to reduce frame torsion at the front of the car.
Surprisingly, the alignment was set to toe out: I’ve never gone for toe out on an older 911 but the test drivers (two names you would certainly know) both say it works with this set up.
There are still some areas needing work here, so development continues. An interesting encounter with Graham, and nice to put a face to the name.
by John Glynn | Feb 8, 2013 | Modified Porsche Hot Rods, Project Cars
Genuine Fuchs wheels have been the lightweight sports rim of choice on Porsche 911 since the 1960s. Fuchs recently started making forged anodised rims for newer Porsches, but it’s not easy to get pictures of the wheels on interesting cars!
That situation improved today, with some pics of a Porsche 996 Turbo S just sold, where the owner also bought a set of Fuchs for it.
This Turbo S is a peach: 2005 with just 23,000 miles and full Porsche history. Slate Grey paint, ceramic brakes, full leather: perhaps the perfect 996 Turbo. Were it not for the spotless Speed Yellow X50 996 Turbo sitting alongside it, also waiting to be handed over to a new owner today, the Slate Grey S would be a no-brainer Ferdinand company car.
Bigger blowers and intercooler, combined with a remap give the Turbo S 30bhp more power than a standard 996 TT. Torque is up to 474 lb/ft and the car will do 191 miles an hour.
Intelligent four wheel-drive and ceramic brakes make the six-speed manual Turbo S a driver’s favourite. Adding these 19″ Fuchs not only looks good, it also drops the sidewall profile of the tyres and adds a bit more footprint, a combination sure to add traction and perhaps a hint more firmness, without being crashy.
The Fuchs wheels on this Porsche 996 Turbo are 8.5 and 11-inch by 19-inch diameter, with 235/35 front and 290/30 ZR 19 rear tyres. These wheels are finished with black centres, but an RSR finish is also available. See the full range of genuine Fuchs wheels on the Porsche tuning website.
by John Glynn | Aug 22, 2010 | Classic Porsche Blog, Project Cars
Life is pretty good at the minute. Freelance has got off to a great start: my online promotion and social media/PR company Mighty Motor Media Ltd is doing a good job for a growing band of clients, and earning this blogger a bit more than I was making as a salaried employee. It’s also giving me a life back! As spare time is on the increase, so the spanners are flying on some long overdue projects.
Orange 1976 Porsche 911 Carrera 3.0
One of them is reworking my Carrera 3.0 into lightweight touring guise. It’s a look I’ve had in mind for a while, as the bare paint interior is not quite classy enough for the outside of the car, and a period-trimmed interior would probably widen the Orange’s appeal should I advertise it for sale, as I’ve been considering. I’m not using it as much as I’d like, and the proceeds of a sale would come in handy to finish the studio and garage I’ve been waiting to get started on for over a year. Carrera 3.0s are making good money in Europe and mine has been gone through from a bare-metal shell to be a really great driver’s car. It might be just what someone (besides me) is looking for.
I’d still have my Carrera-arched 911T, a likely candidate for that spare 3 litre motor I’ve got, and the low-mile 944 Lux I have which is waiting to come back to life – that’ll be a great car when it is up and together. Plus I can buy another Porsche in the USA and potentially take it coast to coast. That’s a box I’ve got to tick one day.
The parts for the interior refit are starting to come together. I bought these seats from London-based Porsche mate back in October last year, but have only just got ’round to picking them up. They’re Impact Bumper Carrera Recaro sports seats from 1977, in what looks like black and grey in these pics, but is actually a charcoal with a lighter centre. They are stop-the-traffic gorgeous.
I’ve got a set of plush carpet that I bought from my buddy Scott at Pelican Parts over a year ago, and some new genuine Porsche window seals that came from Jeremy at MBS Car Parts to install, plus a top tint front screen to go in, replacing the plain heated front glass I put in a while back. I’m not sure quite what to do about the cage, as I might have the T caged in steel. I’m considering adding some lightweight central door locking just for convenience, and some rear pop out windows to refurb and fit, as well a bunch of other bits and pieces – can’t remember some of them. A passenger door mirror for one.
I’m ploughing through some of my other project stuff at the mo, but the C3 will soon be up on stands in the back garden getting the full treatment. Looking forward to starting this job as, whether it goes or stays, it’s going to give me another flavour to try.
